Owner's manual

18
1. Press and hold the SETUP button until the green indicator turns
on. Release the SETUP button.
2. Press and release the button for the mode you want to clear
(TV, VCR, etc.). The green indicator blinks off.
3. Press and release the LEARN button TWICE. The green
indicator blinks off.
4. Press and release the SETUP button. The green indicator turns
off. All learned Commands under that mode are now cleared.
Master Clear - To Clear all Learned Commands under all modes
1. Press and hold the SETUP button until the green indicator turns
on. Release the SETUP button.
2. Press and release the LEARN button TWICE. The green
indicator blinks off.
3. Press and release the SETUP button. The green indicator turns
off. All Learned commands in the remote are now cleared.
Clearing Commands
If you lose your codes or programming instructions, you can find
them available on our website: www.jascoproducts.com