Owner's manual

17
1.
6. Press and hold the Original Remote button (e.g. On-OFF) until
the green indicator blinks once and stays on. If there is a learn-
ing problem, the green indicator blinks for three seconds and
stays on. If this happens, repeat Steps 4 to 6.
7. Repeat Steps 4-6 for other buttons you want to learn.
8. Press and release the SETUP button when all desired remote
commands are learned. Code Learning is now complete.
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you replace
your CD player with another brand or model. If you had learned a
feature from your old CD player’s original remote on to this remote
(such as RANDOM PLAY), that feature would no longer work for your
new CD player. Should you wish to remove or clear one or more
“learned” commands, follow the steps below:
Learning Commands, cont.
2.
3.
4.
6.
Line up your remotes (that you’re learning from) in front of
the Learning remote, on a hard surface approx. 1 inch apart.