Owner's manual

13
Sleep Timer
The SLEEP button enables the remote to turn off your TV after a
period of 1 to 99 minutes as shown below. The remote must be in
TV mode to set a Sleep Timer. This feature works even if your TV
does not have a sleep feature.
1. Press and release the TV device button.
2. Press and hold the SLEEP button until the green indicator
remains lit (about 2-3 seconds).
3. Release the SLEEP button.
4. Press and release the numeric buttons (01-99) for the time
required. The green indicator will blink off to indicate button
press acceptance.
5. TV Sleep Timer is set.
6. Leave the Remote pointing towards the TV with an unob-
structed path.
To cancel the Sleep Timer, press and hold the SLEEP button until the
green indicator blinks, or press and release the ON-OFF button in
TV mode.