Instructions / Assembly

Fan installation

If you feel you do not have enough electrical wiring

knowledge or experience, have your fan installed by a

licensed electrician.

Follow the steps below to prepare the electrical connections.

After that, conform with the descriptions and diagrams on

next pages to connect the fan to your household wiring. Use

the wire nuts supplied with your fan. Secure the wire nuts

with electrical tape. Make sure there are no loose strands or

connections.

PREPARING THE ELECTRICAL CONNECTIONS

1. This remote control unit

is equipped with 16 code

combinations to prevent possible

interference from or to other

remote units. The frequency

switches on your receiver (M) and

transmitter (J) have been preset

at the factory. Please recheck to

make sure the switches on the

transmitter (J) and the receiver (M)

are set to the same position, any

combination of settings will operate

the fan as long as the transmitter (J)

and receiver (M) are set to the same

position.

WARNING: to avoid possible electric

shock, be sure electricity is turned

off at the main fuse box before wiring.