Manualshelf

Owner's Manual

ManualsBrandsGE ManualsDoorGE 19208 GE Wireless SevenSound Door Chime One Push Button
123456789
3. Locate the House Security Code door and screw located on the
back of the chime (See the chime components picture above). Remove
the screw and take off the door.
4. Locate the chime and pushbutton jumpers shown below.
Chime and Pushbutton Jumpers
5. To change the house code, add or remove jumpers as needed. It is
recommended to change only one jumper at a time and then test the
system for proper operation. The jumpers on the chime and pushbutton
must match exactly.
House Code Jumpers