Full Product Manual

14521 vers.1

1/2/13

Surge Protector

Instructions

1. Plug the surge protector into a standard grounding duplex wall

receptacle by fully inserting the plug and ensure that there are no

exposed conductors.

2. The surge protector will now be providing power and surge

protection.

3. Make sure electronic equipment is turned off before plugging into

the surge protector outlet. Do not use extension cords to connect

equipment to the surge protector.

4. Connected equipment can now be turned on.

5. Hold the surge protector ﬁ rmly against wall when removing plugs

to prevent it from pulling loose.

NOTE: Check the blue “PROTECTED” indicator light periodically.

A glowing blue indicator light shows that surge protection is being

provided. If the blue “PROTECTED” indicator light stops glowing, the

surge protective components have expired and the surge protector

should be replaced.

GE is a trademark of General Electric Company and is under

license by Jasco Products Company LLC, 10 E. Memorial Rd.,

Oklahoma City, OK 73114. www.jascoproducts.com

PAGE 1
Surge Protector Instructions 14521 vers.1 1/2/13 1. Plug the surge protector into a standard grounding duplex wall receptacle by fully inserting the plug and ensure that there are no exposed conductors. 2. The surge protector will now be providing power and surge protection. 3. Make sure electronic equipment is turned off before plugging into the surge protector outlet. Do not use extension cords to connect equipment to the surge protector. 4. Connected equipment can now be turned on. 5.
PAGE 2
Estabilizador de voltaje GE Instrucciones: 1. Enchufe el supresor de sobretensiones en un tomacorriente mural estándar doble con conexión a tierra, cubra ambos tomacorrientes al colocar bien la clavija y asegurarse de que no haya quedado ningún conductor expuesto. 2. El supresor de sobretensiones ahora debería estar habilitado para proporcionar potencia y protección contra sobretensiones. 3.