Installation Instructions

Location Term Definition
2.4.1.1.1.6.1.3 Opening/Closing A menu option that sends a report to the selected phone
number stating when the system is opened (disarmed) and
closed (armed).
2.4.1.1.1.6.1.4 Zone Bypass and Restores A menu option that sends a report to the selected phone
number when a zone is bypassed. A report is also sent
when the zone is restored (un-bypassed).
2.4.1.1.1.6.2 Tamper/Fault A menu entry that groups together the tamper and fault
events that are reported to the selected phone number.
2.4.1.1.1.6.2.1 Tampers A menu option that sends a report to the selected phone
number when a tamper occurs.
2.4.1.1.1.6.2.2 Tamper Restores A report is sent when the previous tamper is no longer
active.
2.4.1.1.1.6.2.3 Zone Trouble and Restores A menu option that sends a report to the selected phone
number when a zone fault condition occurs. A report is also
sent when the fault condition is no longer active.
2.4.1.1.1.6.2.4 Expander Trouble and Restores A menu option that sends an expander fault and restore
report to the selected phone number.
2.4.1.1.1.6.2.5 Siren/Line Cut and Restores A menu option that sends a report to the selected phone
number when a siren or phone line fault occurs. A restore
report is sent when the fault is fixed.
2.4.1.1.1.6.2.6 RF Sensor Lost and Restores A menu option that sends a report to the selected phone
number when an RF sensor is missing. A restore report is
sent to the central station when the receiver receives a
valid signal from the lost transmitter.
2.4.1.1.1.6.2.7 RF Low Battery and Restores A menu option that sends a report to the selected phone
number when a low battery condition occurs in an RF
sensor. A restore report is also sent when the low battery
condition is no longer active.
2.4.1.1.1.6.3 Power A menu entry that groups the power events that are
reported to the selected phone number.
2.4.1.1.1.6.3.1 Power Trouble and Restores A menu option menu option that reports mains failure,
mains restore, low battery and low battery restore events
to the selected phone number.
2.4.1.1.1.6.3.2 Aux Short Circuit and Restores A menu option that sends a report to the selected phone
number when short circuit is detected. A restore report is
also sent when the short circuit condition is fixed.
2.4.1.1.1.6.4 Communications A menu entry that groups together the communication
events that are reported to the selected phone number.
2.4.1.1.1.6.4.1 Fail to Communicate A menu option that reports a fail to communicate event to
the selected phone number.
2.4.1.1.1.6.4.2 Test Reports A menu option that sends a test report to the selected
phone number at pre-programmed intervals. The units can
be set in days or hours.
2.4.1.1.1.6.5.1 Program/Download A menu option that reports programming and