and GE Bottom-Freezer Installation Instructions

49-1000585 Rev. 1 29
INSTALLATION INSTRUCTIONS
1
REMOVE THE REFRIGERATOR DOORS (cont)
E
8VLQJD´RUPP´VRFNHWUDWFKHWGULYHU
remove the screws securing the top hinge to the
cabinet.
CAUTION
Lifting Hazard
Single person lift could cause injury. Use
assistance when handling, moving or lifting the
doors.
NOTE: when removing door, to prevent damage to
door and electronics, carefully place the door in a
proper location.
NOTE: The lower door hinge pin and hinge are keyed
and must be matched correctly for the door to self
close properly. Please follow the directions carefully.
NOTE: For proper installation later, please follow
the next step carefully.
)
Remove the tape and keeping the door as
straight as possible, open the door to 90º then lift
straight up to remove it.
REMOVE OPPOSITE DOOR
)ROORZWKHVDPHSURFHGXUHRQWKHRSSRVLWHGRRU
There are no water lines on the opposite side.
For Door in Door Models: Securely tape
the inner and outer doors before installing or
removing. 90º door alignment not required during
installation or removal for these models.
G
REMOVE CENTER HINGE (if necessary)
Remove screws that secure hinge to the cabinet.
,QQHUODUJHUVFUHZQHHGVHLWKHUñ»๢´PP຿»๛๠´
Philips #2, or T27. Outer smaller screws require
7RU[77RUó´GULYH
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
Lift up & off
center hinge
2SHQ'RRUWR
Remove
center screw
Loosen outer
screws
Screws