Installation Manual

21
Installation Instructions
REVERSING THE DOOR (OPTIONAL) (cont.)
B
MODELS WITH FABRIC REFRESH
FEATURE (cont.)
B
MODELS WITH FABRIC REFRESH
FEATURE (cont.)
9
Rotate the Inner door 180°.
Detach the harness retainer, by squeezing its clips
and pulling it out. Rotate it and swap it onto the
opposite side. IMPORTANT: Route its harness
behind the glass.
Remove the plastic cover, by squeezing its clips
and pulling it out. Rotate it and swap it onto the
opposite side.
8
Remove the 8 inside screws. Lift the inner door
upwards using a flat blade screwdriver. Remove the
2 door hinges.
Hinge
screws
Hinge
Plastic
Caps
7
Remove the 2 hinge plastic caps and 4 hinge screws.
Inner door
Outer door
Inside screws
Inside
screws
Door
Hinges
Plastic
Cover
Harness
Retainer
Inner door
Clips
Clips
10
Remove and swap the two plastic caps onto the
opposite side.
Install plastic
caps from
opposite side
here
Plastic
Caps