36-in Quick Specs

DIMENSIONS AND INSTALLATION INFORMATION
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
PGP9036SL
GE Profile
™
Series 36" Built-In Gas Cooktop
Specification Revised 6/17
Cooktop
3-11/16"
13" MAX
depth
30" MIN. to
unprotected
cabinet
12" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
3-3/8" to
rear wall
36" MIN.
Base Cabinet
Electrical junction
box 16" MIN.
below countertop
Cut should
not interfere
with cabinet
structure at
front
12" MIN.
clearance to
side wall
from cut-out
Electrical
cord
Electrical
outlet
Shut-off
valve
Pressure
regulator
1/2" pipe
Coupling
Gas Connection
Dimension and installation information are shown in inches.
36"
21"
33-7/8"
19-1/8"
2-1/2"
Min
AGA REQUIREMENT: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.
NOTE: If installing with a GE Profile™ Telescopic
Downdraft System, consult both cooktop and
downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply
may need to be re-routed to install downdraft.
ELECTRICAL RATING: 120V, 60Hz, 5A
INSTALLATION WITH SINGLE WALL OVEN
INFORMATION:
30" Gas Cooktops are approved for use over select GE
27" and 30" Wall Ovens and Warming Drawers. 30" and
36" Gas cooktops are approved for use over select 30"
Wall Ovens and Warming Drawers. Refer to cooktop
and wall oven/warming drawer installation instructions
packed with product for current dimensional data.
INSTALLATION INFORMATION: Before installing,
consult installation instructions, packed with product,
for current dimensional data.
Dimension and installation information are shown in inches.
*Allow 5-3/4" depth at rear for electrical and gas connections
ADA
COMPLIANT