SS tub GDF645 GDT645 GDT665 GDP645 DDT700 PDT715-785 PDP715 PDP755 Series
8 49-4000214 Rev 3
Select Options 
The light by the selected pad will be lit to indicate which Option has been selected.
Normal 
Temp
This option is for normally soiled dishes, optimizes wash performance while conserving energy.
Boost This option increases the temperature to help clean heavily soiled dishes and will increase the 
cycle time by 20 to 50 minutes. Option may be turned On or Off during the wash cycle. This 
option will also improve dry performance on the Normal cycle.
Steam-Sani, 
Presoak-
Sani, or 
Sanitize
This option raises the water temperature in the final rinse to sanitize your dishware but may 
increase cycle time by 60 minutes. The cycle length will vary depending on the temperature of 
your inlet water. 
NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during 
or after the main wash portion or if the incoming water temperature is so low that adequate 
water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the 
Sanitized or Cycle Sanitized light will not illuminate at the end of the cycle. Utilizing this option 
will modify the cycle to meet the requirements of Section 6, of the NSF 184 Standard for soil 
removal and sanitization efficacy. 
NOTE: Certified residential dishwashers are not intended for licensed food establishments.
Dry Boost 
Off
Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the dishwasher 
door to speed drying. 
Dry Boost 
Normal
Turns on the option for faster drying. This option may add up to 64 minutes to the cycle time. 
On models with the hidden heater feature, this option boosts the temperature of the dishwasher 
during the final rinse portion of the cycle then utilizes a fan to circulate air to dry the dishes. This 
very efficient fan may run for an additional 90 minutes after the cycle is complete to maximize 
drying performance. Fan operation will end if the door is opened during this 90 minute period. 
This option is not available with the Rinse cycle.
Dry Boost 
High (on 
some 
models)
This option can be selected by pressing the Dry Boost pad twice to illuminate the High light. It 
will add additional time to your drying option, further enhancing the dishwasher’s performance 
for difficult to dry items.
Wash 
Zones 
(on some 
models)
Selecting either the Upper or Lower Wash Zones will target dishwashing of just one rack. This 
will shorten the cycle time and conserve energy. This option should be used when dishes are 
placed in only one rack.
Bottle Jets 
(on some 
models)
This option increases the time that the bottle jets are on and may add up to 23 minutes to the 
cycle time. Use this to wash difficult to clean, dishwasher safe baby bottles, sport bottles, tall 
coffee cups, etc. See use recommendations in the 
Loading section.
Delay 
Hours
Delays the start of a wash cycle up to 8 to 12 hours depending on model. Press Delay Hours, 
to select the number of hours, then press Start one time and close door to begin countdown. 
The cycle will start once allotted time has expired.
Lock 
Controls
You can lock the controls to prevent selections from being made. You can also lock the 
controls after you have started a cycle to prevent cycle changes. For example, children cannot 
accidentally start the dishwasher by pressing pads with this option selected.
To LOCK/UNLOCK the dishwasher control, depending on the model, press and hold the Dry 
Boost pad, or the Steam-Sani/Presoak-Sani/Sanitize pads at the same time, for 3 seconds. 
The Lock Controls light will turn on to indicate the control is locked and will turn off to indicate 
the control is unlocked.
5
Getting started
USING THE DISHWASHER










