Installation Guide
20 49-80763-2
Broil Hi
The Traditional Broil Hi mode uses intense heat from the 
XSSHUHOHPHQWWRVHDUIRRGV8VH%URLO+LIRUWKLQQHUFXWV
RIPHDWDQGRUIRRGV\RXSUHIHUOHVVGRQHRQWKHLQWHULRU
To use this mode press the Broil pad once and then 
press Start. It is not necessary to preheat when using 
this mode.
Broil Lo
The Traditional Broil Lo mode uses less intense heat 
from the upper element to cook food thoroughly while 
DOVRSURGXFLQJVXUIDFHEURZQLQJ8VH%URLO/RIRUWKLFNHU
FXWVRIPHDWDQGRUIRRGVWKDW\RXZRXOGOLNHFRRNHG
all the way through. To use this mode press the Broil 
pad twice and then press Start. It is not necessary to 
preheat when using this mode.
Warm
To use this mode, press the Warm pad then press Start. 
Cover foods that need to remain moist and do not cover 
foods that should be crisp. Preheating is not required. 
'RQRWXVHZDUPWRKHDWFROGIRRGRWKHUWKDQFULVSLQJ
crackers, chips or dry cereal. It is also recommended 
that food not be kept warm for more than 2 hours.
Probe (on some models)
Internal food temperature is frequently used as an 
indicator of doneness, especially for roasts and poultry. 
The Probe mode monitors the internal food temperature 
and turns the oven off when the internal food 
temperature reaches the programmed temperature.
Minimum temperatures for food safety can be found at 
ZZZ,V,W'RQH<HWJRY7KHWHPSHUDWXUHSUREHFDQRQO\
be used with Bake, Convection Bake, and Convection 
Roast modes.
To use the probe with preheating:
1. Press the desired cook mode (Bake, Convection 
Bake, or Convection Roast) pad and enter the 
desired cooking temperature.
2. Insert the probe into the food (see Proper Probe 
Placement Guidelines in this section).
3. Once the oven is preheated, place the food in the 
oven and connect the probe to the probe outlet, 
PDNLQJVXUHLWLVIXOO\LQVHUWHG8VHFDXWLRQWKHRYHQ
walls and probe outlet are hot.
4. Program the probe temperature by pressing 
the Probe pad and entering the desired food 
temperature. The maximum internal food temperature 
that you can set is 200º F.
To use the probe without preheating:
1. Insert the probe into the food (see Proper Probe 
Placement Guidelines in this section).
2. Place the food in the oven and connect the probe into 
the probe outlet in the oven.
3. Program the desired probe and cooking mode 
settings by pressing the Probe pad and entering the 
desired food temperature, then pressing the cook 
mode pad (Bake, Convection Bake, or Convection 
Roast) and entering the desired cooking temperature.
Proper Probe Placement Guidelines
After preparing the meat and placing it on the cooking 
pan follow these guidelines for proper probe placement.
Ŷ ,QVHUWWKHSUREHFRPSOHWHO\LQWRWKHPHDWXSWRWKH
handle, such that the point of the probe will rest in the 
center of the thickest part of the meat.
Ŷ 7KHSUREHVKRXOGQRWWRXFKERQHIDWRUJULVWOH
Ŷ )RUZKROHSRXOWU\LQVHUWWKHSUREHLQWRWKHWKLFNHVW
part of the breast. 
Ŷ )RUERQHOHVVURDVWVLQVHUWWKHSUREHLQWRWKHFHQWHU
of the roast.
Ŷ )RUERQHLQKDPRUODPELQVHUWWKHSUREHLQWRWKH
center of the lowest large muscle or joint.
Ŷ )RUFDVVHUROHVRUGLVKHVVXFKDVPHDWORDILQVHUWWKH
probe into the center of the dish.
Ŷ )RUILVKLQVHUWWKHSUREHIURPMXVWDERYHWKHJLOOLQWR
the meatiest area, parallel to the backbone. 
Check the temperature at other locations in the food 
with a food thermometer once the probe temperature 
is reached to ensure that all portions of the food have 
reached desired temperatures.
Probe Care Guidelines
Ŷ 8VHRISUREHVRWKHUWKDQWKHRQHSURYLGHGZLWKWKLV
product may result in damage to the probe.
Ŷ 8VHWKHKDQGOHVRIWKHSUREHDQGSOXJZKHQLQVHUWLQJ
and removing them from the meat and outlet
Ŷ 7RDYRLGGDPDJLQJ\RXUSUREHGRQRWXVHWRQJVWR
pull on the cable when removing it.
Ŷ 7RDYRLGEUHDNLQJWKHSUREHPDNHVXUHIRRGLV
completely defrosted before inserting the probe.
Ŷ 7RSUHYHQWSRVVLEOHEXUQVGRQRWXQSOXJWKHSUREH
from the outlet until the oven has cooled.
Ŷ 1HYHUOHDYHWKHSUREHLQVLGHWKHRYHQGXULQJDVHOIRU
steam clean cycle.
Ŷ 'RQRWVWRUHWKHSUREHLQWKHRYHQ
Cooking Modes (Cont.)
USING THE RANGE: Cooking Modes










