User Guide

DIMENSIONS AND INSTALLATION INFORMATION
JTD3000DN/EN/SN
GE
®
30" Smart Built-In Self-Clean Double Wall Oven
with Never Scrub Racks
For answers to your GE Profile
™
or GE Appliances product questions, visit
our website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/22
Listed by
Underwriters
Laboratories
KW RATING
240V 8.4
208V 6.3
BREAKER SIZE
240V 40 Amps
208V 40 Amps
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 53"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
9-1/2" MAX.
F
Conduit
48"
47" to
bottom of
junction box
Junction box
location
Cutout depth
23-1/2" MIN
22"
23" minimum
door opening
allowance
E
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 400 lbs.)
C
L
Dimension and installation information are shown in inches.
JTD3000
NOTE: Wall coverings, countertops and cabinets
surrounding the wall oven must be able to withstand a
temperature of up to 200°F (94°C).
NOTE: If the cabinet in which the wall oven is installed
does not have a solid bottom, two braces or runners
must be installed to support the weight of the oven. The
runners and braces must support up to 400 lbs (181 kg).
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the handle.
ATTE NTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug and
receptacle. They must be hard wired into an approved
junction box.
IMPORTANT: Before installing, consult installation
instructions packed with product for current
dimensional data.