User Manual

10 49-1000464 Rev. 1
CARE AND CLEANING
Making Ice with Opal
Draining Opal
Water Filter
OnceOpalhasbeencleaned/sanitized,movetheicemakertoitsdesiredlocationandcompletethefollowingsteps.
1.Removeicebin.
2.Fillreservoirwithpotable(safetodrink)waterupto
the"MaxFill"line.Waterhardnessmustbelessthan
12grainspergallon.Donotfillreservoirwithany
liquidexceptwater.Usinganyliquidexceptpotable
water is misuse and will void your warranty.
3. Plug the ice maker into a grounded outlet.
4. Touch the Power button to start the ice maker. The
indicatorontheleft-handsidewilllightup'MakingIce'
to confirm that unit has begun to make ice.
5.Opalwillbegintoproduceicein15-30minutes.Itwill
continue to make ice until the bin is full, or it runs out
of water. To continue making ice, just add more water.
WerecommenddrainingyourOpalwhen:
1.Youputitawayoranytimeit'sbeingrelocated
2. You turn it off for more than a few days. (i.e. vacation)
3. You are not using much ice. Continous recirculation
ofmeltwatermayaffecttaste.Forbestresults,drain
your Opal.
TheOpalWaterFilter,isavailableatGEAppliances
and is the only water filter compatible with Opal. Please
follow the installation instructions included with your filter.
NOTE: Removeyourwaterfilter(ifinstalled)and
reinstall the screened intake cap prior to cleaning your
Opal.
WaterReservoir
Maxllline
Waterltersnapsintoplace
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean
Light Power
SideView FrontView
WaterFilter