Installation Guide

Installation Instructions
A
B
C
6
PREPARE FOR INSTALLATION
Pull the freezer door open to full extension.
Remove 3 attachment screws, located at the
bottom on each side of the freezer door using
3/8” hex socket driver.
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to
secure the door before lifting.
Lift the freezer
door to disengage
it from the slide
mechanism
The door can safely
rest on the bottom.
Do not rest the
door on any other
surfaces to avoid
scratches.
3 Screws
REPLACE FREEZER DOOR
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to
secure the door before lifting.
Pull the lower basket slide mechanism to full
extension with both hands.
Lift the freezer door and align the tabs on the
door bracket sides with the square holes in
slide mechanisms.
Replace the attachment screws and torque the
screws to 65 in-lb.
For adjusting freezer door gaps, follow the
instructions on page 30 or in the Owner’s
Manual.
Replace freezer basket onto the slide brackets
and make sure the freezer door operates and
closes freely.
8
Align and insert
tab on Freezer
Door Bracket with
slot on Freezer
Slide Bracket.
NOTE: Place one
side in first and
then align the
other side.
29
A
B
C
D
E
REMOVE FREEZER BASKET
Pull the lower basket and slide mechanism to
full extension using both hands.
Remove the top
freezer drawer by
fully extending the
drawer then lifting
up and out.
Remove the basket
resting on the
slides.
Push the bottom
basket slides back
until the slide mechanism self retracts.
7
A
B
C
D