Owners manual

49-80550-2
17
Installation Instructions
STEP 5 INSTALL UPPER VERTICAL
SUPPORTS TO HOOD ASSEMBLY
Determine how much of the upper vertical
supports will need to be above the lower supports
to accomplish the frame height determined in
step 4 for this installation.
Using screws provided, attach the 4 upper vertical
supports to the lower vertical supports at the
position determined for frame height. The upper
vertical supports are mounted to the outside
of the lower supports.
STEP 4 DETERMINE FRAME HEIGHT
•Measure exact
ceiling height.
Find the exact
frame height
required
on the chart
on page 12.
Use this formula
to determine
your frame
height:
A-(B+C+D) =
Frame height E where
A is the ceiling height,
B is the countertop
height, C is the height
determined by the
chart on page 12, D
is the height of the
hood measured from
the straight bottom
portion to the top
at the center.
24” Min.*
30” Max.*
36” Min.
Frame
height
µ
Ceiling
height
E
E
A
B
D
C
*See Chart on page 12.