User Manual
49-80747-1 9
Selecting Cooktop Settings
USING THE COOKTOP:7XUQ%XUQHUV2II6HOHFWLQJ&RRNWRS6HWWLQJV+RZ7R6\QFKURQL]H/HIW(OHPHQWV
How To Synchronize Left Elements
&KRRVHWKHHOHPHQWEXUQHUWKDWLVEHVWILWWRWKH
FRRNZDUHVL]H(DFKHOHPHQWEXUQHURQ\RXUQHZ
cooktop has its own power levels ranging from low to 
KLJK3RZHUOHYHOVHWWLQJVQHFHVVDU\IRUFRRNLQJZLOOYDU\
depending on the cookware being used, the type and 
quantity of food, and the desired outcome. In general 
use lower settings for melting, holding and simmering 
and use higher settings for heating quickly, searing 
and frying. When keeping foods warm confirm selected 
setting is sufficient to maintain food temperature above 
140°F. Larger elements and elements marked “Keep 
Warm” are not recommended for melting.
Hi is the highest power level, designed for large quantity 
rapid cooking and boiling. Hi will operate for a maximum 
of 10 minutes. Hi may be repeated after the initial 10 
minute cycle by pressing the + pad.
CAUTION
'RQRWSODFHDQ\
cookware, utensils or leave excess 
water spills on control key pads. This 
may result in unresponsive touch 
pads and turning off the cooktop if 
present for several seconds.
To Turn On
Hold the Sync Burners pad for about half a second 
to connect the two burners. Operate either element as 
described on page 7 to adjust power level.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the 
6\QF%XUQHUV
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
melting
Low
Turn Burner(s) Off
Touch On/Off pad for an individual burner or touch the 
All Off pad.










