User Manual
24 49-80806 Rev. 4
WARNING
 SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the 
range at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
 BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with 
bare hands or a damp cloth can cause burns.
Oven Light Replacement
To remove:
7XUQWKHJODVVFRYHUFRXQWHUFORFNZLVHWXUQXQWLO
the tabs of the glass cover clear the grooves of the 
socket. Wearing latex gloves may offer a better grip.
8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEE\SXOOLQJ
it straight out.
To replace:
8VHDQHZYROWKDORJHQEXOEQRWWRH[FHHG
50 watts. Replace the bulb with the same type of bulb 
that was removed. Be sure the replacement bulb is 
rated 120 volts or 130 volts (NOT 12 volts).
8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEIURPLWV
SDFNDJLQJ'RQRWWRXFKWKHEXOEZLWKEDUHILQJHUV2LO
from skin will damage the bulb and shorten its life.
3. Push the bulb straight into the receptacle all the way.
4. Place the tabs of the glass cover into the grooves of 
WKHVRFNHW7XUQWKHJODVVFRYHUFORFNZLVHWXUQ
  For improved lighting inside the oven, clean the glass 
cover frequently using a wet cloth. This should be 
done when the oven is completely cool.
5. Reconnect electrical power to the oven.
CARE AND CLEANING:2YHQ/LJKW2YHQ3UREH
Oven Light
8VHJORYHV
or cloth
Receptacle
G9 Bulb
Socket
Tab
Glass cover
Receptacle
(on some models)
Oven Probe
The temperature probe may be cleaned with soap and 
water or a soap-filled scouring pad. Cool the temperature 
probe before cleaning. Scour stubborn spots with a soap-
filled scouring pad, rinse and dry.
To order additional temperature probes, see the 
Accessories and Consumer Support sections at the end 
of this manual.
Ŷ  'RQRWLPPHUVHWKHWHPSHUDWXUHSUREHLQZDWHU
Ŷ  'RQRWVWRUHWKHWHPSHUDWXUHSUREHLQWKHRYHQ
Ŷ  'RQRWOHDYHWKHWHPSHUDWXUHSUREHLQVLGHWKHRYHQ
during a self or steam clean cycle.










