Manual

Sievers 860 Laboratory System Specifications
1
Total Organic Carbon
Linear Range 0.3 ppb–1.5 ppm TOC
Precision 0.1 ppb or 1%, whichever is greater
Accuracy ± 5% at 500 ppb C of sucrose
Analysis Time 6 minutes
Sample Flow Rate (nominal) Analysis mode: 0.25 mL/min
Fast Flush (between samples): 0.5 mL/min
Sample pH <3
Sampling Method Grab sampling
Operation PC or standalone operation; one PC can control up to four analyzers
Analyzer Specifications
Power Requirements 100–240 ±10% VAC, 60 W, 50/60 Hz
Fuses T1.6 A, 250 VAC (SloBlo), size 5 x 20 mm (appliance inlet)
Ambient Temperature 10 °C to 40 °C
Normal Operating Environment Intended for indoor use only
Maximum Relative Humidity Up to 95%, non-condensing
Maximum Altitude
2
3,000 m (9,843 ft)
Sparge Gas (if used) Inlet pressure: 30 psig to 50 psig
Sparge Gas Flow Rate 120 mL/min to 150 mL/min
Calibration Stability Typically stable for 12 months
Outputs One USB port to support printer or Flash drive, and one Ethernet port
Installation/Overvoltage Category II
Safety Certifications CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA C22.2
No. 61010-1
Pollution Degree 2
Display Color LCD
Dimensions H: 43.0 cm (16.9 in); W: 21.5 cm (8.5 in); D: 40.5 cm (15.9 in)
Weight 10.5 kg (23.0 lb)
* Trademark of General Electric Company; may be registered in one or more countries.
1
Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.
2
Known to meet performance specifications
300 00240 Rev A
MC12-038
ISO
9001:2008
QUALITY
MANAGEMENT
SYSTEM
The Americas
GE Analytical Instruments
6060 Spine Road
Boulder, CO 80301-3687 USA
T [phone]
T [phone]
F [phone]
[e-mail]
Europe/Middle East/Africa
GE Analytical Instruments
Unit 3, Mercury Way
Urmston, Manchester
UK M41 7LY
T [phone]
F [phone]
[e-mail]
Asia
[e-mail]
[e-mail]
[e-mail]
For specific country contacts, visit
www.geinstruments.com/sales
www.geinstruments.com © 2012, General Electric Company. All rights reserved.