Instruction Manual

ManualsBrandsGE P&W ManualsWater equipmentTonkaflo - GE BEV Series

Fact Sheet

GE BEV Series

Membrane Systems for Ingredient Water

100-600 gpm (23–136 m

/hr)

Features

• GE BEV Pre-engineered RO units are configu-

rable and integrate with pre and post treat-

ment options into a full GE Ingredient Water

System.

• Two-pass and two-train designs ensure capa-

bility to meet product water requirements

• Stainless Steel construction for durability and

suitability in a wet environment

• BEV Full-fit/Cage Wrap membrane elements

for a more sanitary construction and perme-

ate output

• Skid-mounted systems reduce onsite installa-

tion time and costs

Configurable Options

• Stainless steel housings

• VFD for high pressure pump to optimize ener-

gy usage

• Concentrate recovery: Additional In/off skid

membrane area to improve water yield.

• Bank-by-bank cleaning

• Pretreatment: Carbon, Multimedia Filters.

• In-line UV sterilizer

• Inlet chlorine monitor

• Interbank pressure transmitters

• Remote monitoring with data trending

• Stainless Steel Air Tubing

• Leveling Feet

Documentation Included

• Operation and maintenance manual

• Drawings: process flow, piping and instrumenta-

tion, electrical and general arrangement

Operating Parameters

Recovery .............................................................. 75% to 95%

Design temp. ....................................................... 60ºF (16°C)

Operating range ................................. 40-100 °F (4-38°C)

Minimum inlet pressure .......................... 30 PSIG (2 bar)

Average membrane flux .......................................... 16 gfd

Materials of Construction

High-pressure piping ............... Stainless Steel, Sch. 10

Low-pressure piping ................ Stainless Steel, Sch. 10

Frame ................................................................ Stainless steel

Enclosure .................................... NEMA 4X Stainless Steel

Membrane Elements

NSF Certified Spiral-wound Membrane Options

BEV RO

Standard Brackish RO

BEV ULE

Ultra-low energy RO

BEV RO CA

Chlorine tolerant RO

BEV NF CA Chlorine tolerant NF for high-

er recovery.

Cartridge Filtration

Housing material ............................... 316 Stainless Steel

Cartridge filter .................. 1-micron nominal, ROSave*

Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

FS1601EN Jan-14

Summary of content (2 pages)

PAGE 1
Fact Sheet GE BEV Series Membrane Systems for Ingredient Water 100-600 gpm (23–136 m3/hr) Features Documentation Included • • Operation and maintenance manual • Drawings: process flow, piping and instrumentation, electrical and general arrangement • • • • GE BEV Pre-engineered RO units are configurable and integrate with pre and post treatment options into a full GE Ingredient Water System.
PAGE 2
Table 1: Standard Instrumentation Table 2: Major Component Manufacturers Flow* Feed and concentrate Equipment Manufacturer Conductivity Feed, permeate Cartridge Filter GE pH Feed Membrane Element GE Pressure Pre-Filter, Post-Filter, Primary, Final, Permeate, Concentrate, Pump discharge, Inter-bank High Pressure Pump GE Tonkaflo* Cartridge filter housing GE Membrane Housing Wave Cyber Flow Measurement Signet Conductivity, pH Signet HMI Components Allen Bradley Panel View+1000 PLC