s
Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2010, General Electric Company. All rights reserved.
FS1123EN Apr-10
Apollo: I-Series
Reverse Osmosis Water System
Figure 1: Apollo I-Series
Standard Equipment
• Stainless steel tamper resistant enclosure
• Fully automatic
• Solid state controller
• Tank level control
• Low feed pressure pump protection
• Stainless steel multi-stage RO pump
• Stainless steel pressure vessels
• Thin film composite membranes
• Automatic membrane flush system - maximizes
membrane performance and service life
• 5 micron prefilter cartridge
• Stainless steel, liquid -filled pressure gauges
• Product and reject water flow meters
Optional Equipment
• Carbon filter pretreatment
• Duplex water softener pretreatment
• Digital water quality monitor and alarm
• Polyethylene storage tank
• Stainless steel distribution pump
Feedwater Requirements
• SDI < 5
• Free chlorine = 0 ppm
• Saturation index ≤ 0
Table 1: Specifications
I-1440 I-2880 I-4320 I-5760
Gallons Per Day
(m
3
/day)
1440
(5.5)
2880
(10.9)
4320
(16.4)
5760
(21.8)
Rejection Rate ≥ 97% ≥ 97% ≥ 97% ≥ 97%
Operating
Pressure (PSI)
150 psi 150 psi 150 psi 150 psi
Distribution – Pump Single
Phase, 60Hz (120 VAC /10.4
Amps-220/VAC/5.2 Amps)
1 HP 1 HP 1 HP 1 HP
RO Pump – Single Phase,
60Hz (120 VAC/16.2 Amps-
220 /VAC / 8.1 Amps)
1 HP 1 HP 1 HP 1 HP
Depth inches (cm) 22 (56) 22 (56) 22 (56) 22 (56)
Width inches (cm) 36 (91) 36 (91) 36 (91) 36 (91)
Height inches (cm) 60 (152) 60 (152) 60 (152) 60 (152)
Weight lbs (kg) 260 (118) 280 (127) 300 (136) 325 (147)
Note: Specifications subject to change without notice.
Contact Us
For more information on the Apollo-I Series contact
us at 1-800-446-8004, visit our website or contact
your GE representative.
Note: Product line manufactured by GE Mobile Water, Inc, 5900
Silver Creek Valley Rd, San Jose, CA 95138.