Instruction Manual

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
AP-FSpwPRO_AP_Series_60Hz_EN.doc Apr-13
Fact Sheet
PRO AP Series 60 Hz
Reverse Osmosis Machines from 11 to 102 m
3
/hr
Basic Features
1000 mg/L feed TDS and 20C water tempera-
ture design
GE Intelligent Platforms' VersaMax Micro PLC
with 6-inch QuickPanel monochrome
touchscreen.
Xylem SV high pressure pump
Communication: RS232/DH485
4-20 mA instrument display on instrument
center
Materials of Construction
High-pressure piping 316 SS, Sch. 10
Low-pressure piping PVC, Sch. 80
Frame Painted blue carbon steel
Enclosure IP54 (painted carbon steel)
Instrumentation
Flow Meters Permeate, concentrate
Conductivity Permeate
Pressure Pre-filter, post-filter, primary,
final, permeate, concentrate,
pump discharge
Pressure Switch Feed, permeate, concentrate
pH (Optional) Feed
ORP (Optional) Feed
Instrument Center Signet 8900
Options Available
Premium controls and instrument package
pH and ORP sensors added to Basic package
Skid mounted motor starter (Wye-Delta) added
to basic package
High Rejection Membrane Elements
PRO Clean-in-Place units
Allen Bradley PLC and HMI packages
Grundfos CRN high pressure pump(s)
Documentation Included
Operation and maintenance manual
Drawings: piping and instrumentation, electrical
and general dimension
Operating Parameters
Design Recovery
1
75%
Design temp. 20ºC
Operating range 2 to 30ºC
Nominal rejection 97-99%
Design inlet pressure 2-4 bar
1
Recovery Rate can vary +/- 5%

Summary of content (2 pages)