Manual

Fact Sheet
©2006, General Electric Company. All rights reserved.
*Trademark of General Electric Company; may be registered in one or more countries. FS1095EN 0703
Asia/Pacific
Shanghai, China
[phone]
Americas
Watertown, MA
[phone]
Europe/Middle East/Africa
Heverlee, Belgium
[phone]
Find a contact near you by
visiting gewater.com or
e-mailing [e-mail].
Global Headquarters
Trevose, PA
[phone]
XPleat* GF Filters
Glass Microfiber Nominal and Absolute
Figure 1: XPleat GF Filters
Typical Applications
• For general water services
• For fine process fluid filtration
• For processes that require excellent flow rates
General Properties
XPleat GF filters are available in nominal and abso-
lute micron ratings (Figure 1). The nominal micron
ratings are: 0.2, 0.45, 1.0, 3.0 and 10.0 µm. The
absolute micron ratings are 1.0, 2.0, 4.0, 8.0 and
15.0 µm. Tables 1, 2, 3 and 4 show further details on
materials of construction, dimensions, operational
limits and flow performance.
Table 1: Materials of Construction
Table 2: Dimensions (nominal)
Outside Diameter
2.75” (70mm)
Inside Diameter
1.25” (31 mm)
Effective Filtration Area
3.4 ft
2
(0.32 m
2
)
Lengths
10, 20, 30, 40 inches (25.4, 50.8,
76.2, 101 cm)
Table 3: Operational Limits
Table 4: Flow Performance in Clean Water
1
1
Data based on 10” length filter
Additional Information
• GE Water & Process Technologies filter car-
tridges are designed and manufactured for
resistance to a wide range of chemical solu-
tions. Conditions will vary with each application
and users should carefully verify chemical com-
patibility. Please contact your GE distributor for
more information.
• Table 5 provides ordering information on the
XPleat GF filters