Manual

Page 2
24-hour Emergency Numbers
EU Free phone: [phone]
Other Countries: [phone]
Deoxygenation
Our patented DEOX* process provides a water
quality of less than 1 ppb dissolved-oxygen, with
0.5 ppb typically measured. Clients in the pulp
and paper, petrochemical, refinery, and utility in-
dustries have benefited by our capability to deox-
ygenate water from virtually any source, including
municipal, well, raw surface water, condensate,
and demineralised water. This service is readily
available on an emergency basis, and is also typi-
cally utilised during by-pass of the client’s deaera-
tor for inspections and repairs.
Softening
The MobileFlow system provides softening at high
flow rates, routinely producing water at 136
m
3
/hr, and can be reconfigured to produce 227
m
3
/hr per trailer. Mobile and quickly available, this
application can be provided with either exchange
service off-site regeneration or on-site regenera-
tion. A MobileFlow unit has a softening capacity
in excess of 975,000 grams.
Condensate Polishing
Utilising a cation/mixed bed configuration, con-
densate can be polished to remove crud loading
and trace ionic contaminants during unit start-
ups or for longer-term requirements. The 10%
cross-linked cation resin is strong enough to with-
stand aggressive temperatures and crud loads of
the condensate while keeping the mixed bed res-
ins clean for final ionic contaminant removal
without interference.
General Properties
The MobileFlow system incorporates an exclusive
piping system linking six rubber-lined ASME code
pressure vessels. The international version
(shown overleaf) has three axels and the North
America version has two axels.
Pressure Drop Curve
Demineraliser
Processing Capacity
Further Information
For further information about the services provid-
ed by GE please call the main number or visit
www.ge.com/water.
International version
Dimensions and weights
Overall length
with tractor
16.5m
Trailer length
13.2m
Trailer height
4m
Trailer width
2.6m
Gross trailer
operating weight
41,000 kg
Electrical
Electrical power
requirements
220/240V, 20 amps
Specifications
Inlet/outlet
connections
4” 150 psi flange or 100 mm 1-inlet, 1-outlet
Pressure vessels
6 per trailer, ASME code, 100 psi (7 bar) W.P.,
rubber lined
Resin capacity
325,000 grams (Demineralisation)
Outlet resin trap
8” with suitable mesh element
Suitable media
Ion exchange resins, synthetic adsorbents,
activated carbon, granular filter media, etc.
Instrumentation
• Two conductivity meters, with alarms
• High/Low temperature alarms
• Complete pressure instrumentation
• Rate of flow indicator
• Totalising flow meter
Controls
• Adjustable pressure reducing valve on inlet
• Isolation valves on all pressure vessels
• Automatic shutdown system
• External audible alarms
Heating
Electrical tube heaters