Spec sheet

ZISB360DKMONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
Product Specification Revised 10/16
OVERALL DIMENSIONS
AFTER PANEL INSTALL
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
SPECIFICATIONS
Overall Width 38" (96.5 cm)†
Overall Height 84 1/2" (214.6 cm) †
Overall Depth 26" (66.0 cm) †
Door Clearance 20 5/8" (52.4cm)
Cutout Width 39" (99.1 cm)
Cutout Height 85" (215.9cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 675 lb (306.2 kg)
FLUSH INSET
INSTALLATION
† Dimensions include 3/4" custom cabinet panel
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
38" (96.5)
84 1/2"
(214.6)
72 5/8"
(184.5)
68 5/8"
(174.3)
ZIS360DH
FRONT VIEW
11 11/16"
(29.7)
20 5/8" (52.4)
26" (66.0)
4"
(10.2)
SIDE VIEW
* 83 1/2"
(212.1)
15 3/8"
(39.1)
*39 17/32"
(100.4)
** These refrigerators are equipped with a 2-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
35" (89.0)
Case width
**13"
(33.0)
**15"
(38.1)
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
20 5/8"
(52.4)
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
TOP VIEW
*115° Door swing
Doors can be adjusted to
90° door swing
Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84".