Quick Specs

ZIS480NKMONOGRAM 48" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
Product Specification Revised 10/16
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
SPECIFICATIONS
Overall Width 50" (127.0 cm)†
Overall Height 84 1/2" (214.6 cm) †
Overall Depth 26" (66.0 cm) †
Door Clearance 28 5/8" (72.1 cm)
Cutout Width 51" (129.5 cm)
Cutout Height 85" (215.9 cm)
Cutout Depth 26 3/16" (66.5 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 775 lb (351.5 kg)
FLUSH INSET INSTALLATION
† Dimensions include 3/4" custom cabinet panel
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
50" (127.0)
84 1/2"
(214.6)
72 5/8"
(184.5)
68 5/8"
(174.3)
ZIS480NH
FRONT VIEW
11 11/16"
(29.7)
20 5/8" (52.4)
26" (66.0)
4"
(10.2)
SIDE VIEW
* 83 1/2"
(212.1)
** These refrigerators are equipped with a 2-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
47" (119.4)
Case width
**15"
(38.1)
**20"
(50.8)
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
28 5/8"
(72.7)
TOP VIEW
*115° Door swing
Doors can be adjusted to
90° door swing
Use leveling legs and wheels for maximum 1" height
adjustment from shipping height. Nominal installation height is 84".