DL 455a362e561c07b96069ab446b42

49-80152-7
9
PARTS PROVIDED
Locate the parts packed with the hood.
2 Stainless Steel Grease Filters
¿OWHUVZLWKPRGHOV
Allen Wrench
For Implement Rods
Installation Preparation
Duct Transition
with Damper
Warming Shelf
Backguard
2 Implement Rods and 4 Stand-offs
Grease Tray
Heat Lamp
(2 with 48" models)
HARDWARE PACKAGE
Locate and check contents.
Screws shown actual size.
2 shoulder screws
to secure shelf to
bottom of hood.
2 Phillips head
machine screws
to secure shelf to
bottom of hood.
10 Phillips head screws:
Use 6 to secure hood to
the wood support: (2 are
secured to wood support)
Use 2 to secure 30" and 36"
backguards to wall. Use 4 to
secure a 48" backguard.
4 Phillips head screws to
secure the transition to
the hood outlet on the top
6 (3/16") hollow
wall anchors with
screws, use 2 to
secure hood to
the wall at the
bottom. Use 4 to
secure backguard
and shelf.
4 screws to secure the
wood support to the wall
POZIDRIV 3
1 hex head screw and
lock washer, to secure
the blower
ÀDWZDVKHUV
for wall anchors
Wood Support
with Original Screws
REMOVE THE PACKAGING
• Remove packages from the
"V" shaped cardboard section.
Remove shipping pads.
• Lift the hood out of the box.
IMPORTANT:
Lift the hood by grasping the
outside edges of the exhaust
opening on the top.
• The vent hood motor is
shipped secured to the skid
with 4 screws. Locate and
remove 2 screws on each
side of the motor. Discard the
shipping skid and screws.
*UHDVH¿OWHUVPXVW
be removed. Grasp
the latch, pull the
¿OWHUXSDQGOLIWRXW
• Lift to remove the grease
WUD\V6HWJUHDVH¿OWHUVDQG
trays aside for later installa-
tion. DO NOT DISCARD.
• From the inside of the hood,
loosen (do not remove) the
2 screws holding the wood
mounting support to the back of the hood. The screws
should be backed out of the wood to 1/4". Remove the
set aside the mounting support with screws for later
installation. DO NOT DISCARD.
• Remove tape and packing material from the hood and all
supplied parts.
Hood
Parts
Wood
Mounting
Support
Motor
Mounted
on Skid
Shipping Carton
Duct
Transition