Spec sheet
ZGU486NDPSS
MONOGRAM 48" PROFESSIONAL GAS RANGETOP
WITH 6 BURNERS AND GRIDDLE (NATURAL GAS)
Product Specification Revised 7/18
* The opening between a 4" high backsplash must be 36"
to allow the rangetop to slide back against the wall.
WARNING
installations without a hood require 48" minimum to
combustibles above the rangetop. A custom hood
installation with exposed horizontal combustible
surfaces must have an "auto-on" feature. Refer to hood
installation instructions for specific hood clearances. The
surface of the entire back wall above the countertop
and below the hood must be covered with a non-
combustible material such as metal, ceramic tile, brick,
marble or other stone.
Allow 8" free space below the top surface of countertop.
Allow additional clearances below the burner box to install
the regulator and make house gas supply connections.
Use a 90° elbow to route the gas connections and limit
interference with drawers or other cabinetry.
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)
Professional rangetops oer a number of choices in size and
rangetop configurations.
PRODUCT DIMENSIONS AND CLEARANCE
A 48"- or 54"-wide professional vent hood with a minimum
900 CFM is recommended for installation over this rangetop.
Clearances between rangetop and side wall or combustible
material must be at least 12" on each side.
Front of deep cabinets can align
with control panel beveled edge.
Cooktop
1/2" Above Adjacent
Countertops
Front of deep cabinets can align
with control panel beveled edge.
Cooktop
1/2" Above Adjacent
Countertops