User's Manual

DOCU0096 - CAS-GPS Personnel Protection Unit Operation Manual-A2.docm rev A2
Page 2 of 4
Overview
PROD1006-x - The Personnel Protection Unit (PPU) is comprised of three parts:
1. PROD1061 - PPU Remote Alarm
This unit is fitted to the operator’s helmet visor
during normal operation. The Remote Alarm is a
visual indicator extension of the paired host Tag.
The Remote Alarm is fitted to the PPU tag for
pairing, charging and testing the device.
2. PROD1060-x - The PPU Tag
The Tag communicates with CAS-GPS enabled
fleet for situational awareness. The Tag is worn
on the user’s belt. The Tag contains GPS
functionality for Geo-location and should be
worn outside of clothing for maximum
performance.
3. PROD1064 - Remote Alarm Helmet Adaptor
This adaptor is used for fixing the remote alarm
to a helmet visor.
Fitting the Remote Alarm Helmet Adaptor
1. Clean the top surface of the helmet visor as per the helmet manufacturer’s
Instructions.
2. Fit the Remote Alarm to the Helmet Adaptor.
3. Peel the self-adhesive backing from the rear of the helmet adaptor.
4. Apply the Remote Alarm and Adaptor to the helmet visor so that the ledge of
the Remote Alarm will be visible to the helmet user. Press firmly.
5. The Remote Alarm is removed from the Helmet Adaptor for charging, pairing
and testing by depressing the spring levers located on the side of the Remote
Alarm.