User's Manual

CAS GPS Node User Manual
CAS GPS User Manual (DOCU0097) A Page 20 of 24
10 Service, Maintenance & Disposal
10.1 Equipment Service
10.1.1 Display Unit
• Clean screen surface with a clean dry soft cloth - Do not use solvents or cleaners on the screen surface!
• Check for physical damage to screen surface.
• Check the cable connector is securely connected at the rear of the cradle.
• Check the mounting bracket is secure – finger tighten only if loose.
10.1.2 System
• Check visually that all Nodes are in good condition and the cables (where applicable) are securely connected.
• Check visually that no cables are loose or damaged.
• Verify that the system is working correctly prior to starting the vehicle and during operations.
10.1.3 Scheduled System Servicing
It is recommended that the system undergo preventative scheduled maintenance and inspections. These should be
carried out by trained and authorised personnel every 6 months or 1500hrs (whichever occurs first).
10.1.4 Equipment Maintenance
If the system is not functioning as expected and a fault cannot be resolved, please contact your nearest authorised
representative.
It is essential that no attempt be made to repair the equipment (other than
replacement of system components). Opening equipment enclosures should
never be attempted and will void any warranty and could compromise the safe
operation of the system.