User's Manual

CAS GPS Node User Manual
CAS GPS User Manual (DOCU0097) A Page 11 of 24
9.4.1.4 Cable Connections for Fixed Installation
See Installation manual for detailed instructions.
9.4.2 Node
9.4.2.1 Fixed Node
The CAS-GPS NODE Light Vehicle Fixed unit comprises of a high performance GPS receiver and on-board digital radios for
ranging measurements, Bluetooth
®
wireless technology and point to multipoint communication.
The unit is powered from 12 – 24VDC vehicle derived power supply and features 2 x digital inputs for control signals & 1 x
RS232 communication port for primary communication to the in-cab GE Personal Digital Assistant (PDA) running the CAS-
GPS application software or communication to a PROD1052-LRx node to provide an on-board system functional test.
This roof mounted unit optionally features an internal battery back-up for continuous operation during a vehicles powered
down state.
Bluetooth
®
wireless technology provides a secondary communication link to the in-cab PDA to allow for real time situational
awareness of the CAS-GPS enabled fleet.
When used for connection to a PDA, the Light Vehicle Fixed Node requires control signals for reverse and brake to be routed
to the digital inputs for complete system functionality.
9.4.2.1.1 Fixed Node Installation
See Installation manual for detailed instructions.
9.4.2.2 Portable Node
The CAS-GPS NODE Portable Light Vehicle unit comprises of a high performance GPS receiver and on-board digital radios for
ranging measurements, Bluetooth
®
wireless technology and point to multipoint communication.
The unit is charged from a 12 – 24VDC power supply and features magnetic mounts for quick installation on visiting site
vehicles, allowing full functional situational awareness integration with the existing CAS-GPS enabled fleet.
This roof mounted unit features an internal rechargeable battery for continuous operation for 24 hours without the need for
cabling.
Bluetooth
®
wireless technology provides a primary communication link to the in-cab PDA to allow for real time situational
awareness of the CAS-GPS enabled fleet.
The PDA Fixed Cradle must only be installed by an authorised person.
The CAS GPS Node must only be installed by an authorised person.