User Manual CAS GPS Node Rev A DOCU0097 PROD1052 GE Mining Industrea Mining Technology PO Box 5107 Fountaindale, New South Wales Australia, 2258 t +61 2 4336 1800 f +61 2 4336 1888 e EnquiriesIMT@geindustrea.ge.com w www.ge.
CAS GPS Node User Manual Table of Contents Table of Contents ......................................................................................................................................................................................................................... 2 Document Revision ....................................................................................................................................................................................................................
CAS GPS Node User Manual 13.6 Australia ............................................................................................................................................................................................................................... 22 14 Warranty Terms ...............................................................................................................................................................................................................
CAS GPS Node User Manual Document Revision REV DESCRIPTION A Author Initial Release Review Approval Date APT Copyright Notice No part of this publication may be reproduced, transmitted or transcribed into any language by any means without the express written permission of GE Mining or its subsidiaries. Disclaimer These materials are provided for information purposes only, "as is," without express or implied warranty of any kind.
CAS GPS Node User Manual 1 Warnings Installation should be in accordance with the installation procedures defined by GE Mining and must only be performed by authorised and qualified installers. The CAS product is a driver’s aid and should not be relied upon as the primary means of reducing the risks of high potential interactions. Interaction include between Heavy Vehicles, Light Vehicles, infrastructure and personnel.
CAS GPS Node User Manual 3 Scope CAS GPS Node User Manual This user manual covers the following variants of the CAS GPS Node system: PROD1052-LRx Light Vehicle Fixed Expandable Installation Node PROD1052-LFx Light Vehicle Fixed Installation Node PROD1052-LPx Light Vehicle Portable Node (Bluetooth®) PROD1052-BGx Boomgate Node PROD1052-STx Self Test Node 3.
CAS GPS Node User Manual 5 Storage Where the equipment is not to be installed immediately, proper storage is important to ensure protection of equipment and validity of warranty. All equipment should be stored indoors protected from the elements in a cool dry area. If storing on the ground, ensure that the storage area is not an area where water will collect. All equipment which contains batteries, must be placed in “Transit Mode” prior to storage. This mode disables the battery.
CAS GPS Node User Manual 9 Operation 9.1 Principle of Operation The CAS-GPS Intelligent multi-purpose node comprises of a high performance GPS receiver, Vehicle to Vehicle (V2V) radio transceiver, high accuracy Ranging RF transceiver, CAN bus, RS -232 / RS-485 communications, Digital Input (2) / Output (1), Bluetooth ® wireless technology and internal battery that is available in the following configurations: 1. 2. 3. 4. 5.
CAS GPS Node User Manual 9.2 Positional Tracking The system uses the latest precision point GPS technology which gives accurate location-based tracking. For the GPS to work accurately the Node must have clear line of sight to the sky. Obstructions such as machine structure, work roof or deep pit may affect the accuracy or operation of the GPS. 9.
CAS GPS Node User Manual 9.4.1.2 Suction Cup Installation of PDA Cradle In Vehicle Clean the mounting surface thoroughly. Ensure that the surface is completely dry and free of any dirt or residue. For best results use rubbing alcohol or similar to clean the surface prior to installation. Determine placement of your suction cup by using the cradle as a guide.
CAS GPS Node User Manual 9.4.1.4 Cable Connections for Fixed Installation The PDA Fixed Cradle must only be installed by an authorised person. See Installation manual for detailed instructions. 9.4.2 9.4.2.1 Node Fixed Node The CAS-GPS NODE Light Vehicle Fixed unit comprises of a high performance GPS receiver and on-board digital radios for ranging measurements, Bluetooth® wireless technology and point to multipoint communication.
CAS GPS Node User Manual 9.4.2.2.1 Portable Node Installation Cradle Suction Mount The Portable Node is attached to the vehicle using a magnetic base.
CAS GPS Node User Manual Select the Self Test Setup Screen Enter the Node ID Number from the barcode on the Node and select ‘Commit Serial#’ CAS GPS User Manual (DOCU0097) A Page 13 of 24
CAS GPS Node User Manual Scroll down the page and enter the Location details then select Sync CAS GPS User Manual (DOCU0097) A Page 14 of 24
CAS GPS Node User Manual 9.4.2.4 Portable Node Charging The Portable Light Vehicle Node battery is charged using the specially designed charging station. This charging station takes care of the battery and takes approximately 6 hours to charge the battery completely. Battery charge status of the Node can be checked on the PDA Screen.
CAS GPS Node User Manual 9.4.2.5 Charging Warnings Only use charge cables provided. Charging can be plugged into a normal vehicle accessory power outlet. Charging can be carried out during operation. Do not pass charging cable through vehicle doors or windows. Do not use damaged power cords or plugs. Do not bend or damage the power cord. Do not touch the power cord with wet hands, or disconnect the charger by pulling the cord. Do not Short-Circuit the Charger or the Battery.
CAS GPS Node User Manual 9.4.2.6 Using the PDA Display On Vehicle Start-up Immediately after starting the vehicle and before putting it into motion, perform a quick check of the Display’s status bar. Check that none of the icons are Red, if so your CAS GPS system is not functioning correctly and its operation cannot be assured! If any of the CAS Icons are red the system may not be operating correctly.
CAS GPS Node User Manual 9.4.3 Boomgate Node The CAS-GPS NODE Boomgate access control comprises of a high performance GPS receiver and on-board digital radios for ranging measurements, Bluetooth® wireless technology and point to multipoint communication. The unit accepts power from a 12 – 24VDC power supply and features 2 digital inputs & 1 digitally controlled output.
CAS GPS Node User Manual 9.4.4 Light Vehicle Node 9.4.5 Light Vehicle Expandable Node The CAS-GPS NODE Light Vehicle Fixed Expandable unit comprises of a high performance GPS receiver and on-board digital radios for ranging measurements, Bluetooth® wireless technology and point to multipoint communication.
CAS GPS Node User Manual 10 Service, Maintenance & Disposal 10.1 Equipment Service 10.1.1 Display Unit • Clean screen surface with a clean dry soft cloth - Do not use solvents or cleaners on the screen surface! • Check for physical damage to screen surface. • Check the cable connector is securely connected at the rear of the cradle. • Check the mounting bracket is secure – finger tighten only if loose. 10.1.
CAS GPS Node User Manual 11 Decommissioning • • • • • Removal of the system should only be performed if authorised by the owner of the vehicle. Removal should be performed by a qualified person. All system components and wiring should be removed. All vehicle wiring should be restored back to original condition. Dispose or store removed system in accordance with this manual. 12 Disposal The electronic equipment discussed in this manual must not be treated as general waste.
CAS GPS Node User Manual 13 Authorised Representatives 13.1 Brazil 13.2 South Africa Avenida Portugal 4511/Bairro Itapoa Belo Horizonte, M.G. 31710-400, Brazil P: +55 31 3311 7200 F: +55 31 3311 7205 Email: brasil@joyglobal.com www.joyglobal.com Probe CAMS 245 Albert Amon Road Meadowdale Germiston 1614 P: +27 11 453 0924 F: +27 11 453 2141 www.probebattery.co.za 13.3 13.4 Indonesia Canada General Electric Canada 2300 Meadowvale Blvd, Mississauga, ON, L5N 5P9 PT Intecs Teknikatama Industri Jl.
CAS GPS Node User Manual 14 Warranty Terms Equipment and Parts: 15 months from delivery, or 12 months from when system is placed in service (whichever occurs first). Modifications to this product without written consent from the manufacturer or its designated authorised representatives will void all warranty obligations.
CAS GPS Node User Manual 15.2 INDUSTRY CANADA Compliant This Class B digital apparatus complies with Canadian ICES-003. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.2.1 Concerning Radio Transmitters This device complies with Industry Canada’s licence-exempt RSSs.
