User's Manual
Table Of Contents
- Slide Number 1
- Document Control
- Transport
- Storage
- Unpacking of Equipment
- Installation
- Slide Number 7
- Specialty Tools Required / Adhesives
- Specialty Tools Required / Adhesives
- Specialty Tools Required / Adhesives
- In Vehicle Unit (IVU) (PROD0842)
- Input Power & Signal Connections
- Input Power & Signal Connections
- IVU Mounting
- Mounting Locations & Cable Runs
- Mounting Locations & Cable Runs
- Light Vehicle
- Light Vehicle
- Haul Truck
- Haul Truck
- Slide Number 21
- Slide Number 22
- Slide Number 23
- Slide Number 24
- Heavy vehicle (excluding Haul Truck)
- Heavy vehicle (excluding Haul Truck)
- Display Unit (PROD0839)
- Display Unit (PROD0839)
- Display Unit (PROD0839)
- Display Unit (PROD0839)
- Display Unit (PROD0839)
- RF Installations
- RF Installations
- Upgrades
- Interconnections – 4CAM/4RF
- Interconnections – 4CAM/4RF
- Interconnections – 1CAM/1RF
- Interconnections – 1CAM/1RF
- Interconnections - LV
- Interconnections - LV
- Input Power & Signal Connections
- Slide Number 42
- Slide Number 43
- Deutsch Connector
- Input Power & Signal Connections
- Input Power & Signal Connections
- General Wiring Principles
- Antenna cable terminations
- Antenna cable terminations
- Antenna cable terminations
- Antenna cable terminations
- Antenna cable terminations
- Antenna cable terminations
- Testing Antenna cable terminations
- Testing Antenna cable terminations
- Antenna Cable Connection Security
- Configuration
- Configuration – Installation Measurements
- Configuration – Installation Measurements
- Configuration – Installation Measurements
- IVU Orientation
- IVU Orientation (Examples)
- Configuration
- Configuration
- Shovel with Heading
- Shovel with Heading Overview
- Primary IVU Configuration
- Primary IVU Configuration
- Secondary IVU Installation
- Secondary IVU Wiring
- Secondary IVU Configuration
- Shovel Heading Testing
- Shovel Heading Testing
- Configuration & Install Record
- Configuration & Install Record
- Configuration & Install Record
- Record Keeping
- Trouble Shooting
- Trouble Shooting
- Trouble Shooting
- Service and Maintenance
- Service and Maintenance
- Decommission
- Disposal
- Disclaimer
- Disclaimer
- Contact Details
- Slide Number 88
64
CAS GPS Installation Manual Rev G1
2/17/2016
Length(m): Width(m): Heigth(m):
10.00
10.00
10.00
GPS Antenna
Clear Back
0 1 2 3 4 5 6 7 8 9
Q W E R T Y U I O P
A S D F G H J K L
Ent
Shift
Z X C V B N M .
Char Space
PassCode:
Save
Cancel
CASGPS
CASInstaller
Vehicle
Wi-Fi IP
Asset Name:
Asset Type:
Object Type:
Orientation:
Forward:
Reverse:
Length(m): Width(m): Heigth(m):
10.00 10.00
10.00
192.168.1.5
HV1234
CAT793
Heavy Vehicle Truck
1
Input 3
Input 2
Network
>
>
>
>
Configuration
Record the IVU orientation
here.
Click on the Orientation
drop down box and select
from the list of numbers
which refer to the table
listed on page 39 of this
manual.
Key Board
Enter the Asset Name (usually the
vehicle’s ID) using the Keyboard
below
The Asset type is not critical but
provides a record of the make and
model of the vehicle.
Select the Object type by clicking
on the object type drop down box
and select the correct vehicle for
the installation.
Once the object type is selected it
automatically populates the
typical dimensions for the
particular vehicle type.
Ensure the location of the GPS
Antenna (Length, Width and
Height) is correct for the install
When completed enter the
passcode before pressing Save
button on the lower right hand
side of the screen, this
configuration is now stored and
system is now ready to use.
This ICON will change
once the Object Type has
been chosen