User's Manual
Table Of Contents
- 1 Document Revision
- 2 Copyright Notice
- 3 Disclaimer
- 4 Warnings
- 5 Company Details
- 6 Scope
- 7 Transport
- 8 Storage
- 9 Unpacking of Equipment
- 10 Installation
- 11 Test & Commission
- 12 Operation
- 13 Service, Maintenance & Disposal
- 14 Troubleshooting
- 15 Decommission
- 16 Disposal
- 17 Specifications
- 18 Authorized Representatives
- 19 Warranty Terms
- 20 Regulatory Information
CAS GPS User Manual.docx
Revision: E1
Page 15 of 30
CAS GPS User
Manual
12.3.1.7 RF Detections
The CAS GPS system can optionally be fitted with additional RF proximity detection unit(s). This may be the
case if the site wants additional redundancy in the system or commonly when sites update their existing
CAS-CAM/RF systems.
The following example shows a truck travelling forward at 6km/h with the Front camera selected. As a
vehicle fitted with RF detectors (only) approaches from the RHS the Right camera will automatically be
selected and the quadrant highlighted to indicate a vehicle is within the preconfigured distance (30m in this
example). Note no icon is presented on the screen but the vehicles ID appears in the table (no speed or
distance is displayed).