User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 87 of 126
Issue: E
14 SYSTEM CALIBRATION & TESTING
The following equipment is required for the initial calibration and ongoing in-service testing
of the CAS-CAM/RF
®
Equipment. A brief overview is only given for general understanding
by the user.
14.1 Calibration System (PROD0260)
The CAS-CAM/RF
®
Calibration System (PROD0260) comprises of a Heavy Vehicle (HV)
RF Unit enclosure configured as a Calibration Unit (PROD0193) which is in effect a mobile
Test Station (TS) Unit. The unit is mounted on a portable tripod, battery powered and
interfaces via a RS-232 interface to a Portable Computer (laptop or Pocket PC / Palm
PDA) running the CAS-CAM/RF
®
Installer Mode software.
The Calibration System allows for programming the Detection Zones of all RF tagged
objects (i.e. Heavy Vehicle (HV), Light Vehicle (LV), Stationary Object (SO), Personnel
Tag (PT), Test Station (TS)).
An approved CAS-CAM/RF
®
System Installer can only conduct the Calibration Process
using the Installer Mode software. Refer to the CAS-CAM/RF
®
Installation Manual for
details.
14.2 Test Station System (TS) (PROD0251)
All CAS-CAM/RF
®
Equipment functionality can be tested on site using a Test Station (TS)
System (PROD0251).
Test Stations would normally be installed in locations frequently passed by CAS RF
tagged objects (e.g. maintenance workshop, GO-LINE, refueling station etc) and serve to
provide regular functional two-way testing of all RF tagged objects. Solar power versions
are available for remote locations.
Refer to section 4.8 for more details.