User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 84 of 126
Issue: E
13 INSTALLER MODE SETTINGS
The CAS-CAM/RF
®
equipment contains programmable system settings that can only be
configured at either the factory at the time of order or by an AMT Service Agent. These
system settings are not accessible by the user. Software setting changes require the use
of a laptop PC with RS-232 interface running the CAS-CAM/RF
®
Installer Mode Software.
Hardware setting changes require opening instrument enclosures and changing internally
configured jumper link settings.
The following settings are programmable by the Installer or can be factory preset at the
time of order:
Heavy Vehicle Display Unit Settings
CHANNEL Settings (6 camera channels)
• Channel Title (8 character title maximum)
• Brightness (1-5)
• Colour (1-5)
• Mirror (on, off)
• Enabled (yes, no)
SWITCHING Settings
• Forward Switching (yes, no)
• Forward Channel (1-6)
• Reverse Switching (yes, no)
• Reverse Channel (1–6)
• Sleep Time (off, 5, 10, 15, 20, 25, 30 mins)
• RF Switching (yes, no)
• Wake on Forward (yes, no)
• Wake on Reverse (yes, no)
• Central RF (yes, no)
• Keypad Tone (yes, no)
• Auto Cycle (off, 2s, 4s, 6s, 8s, 10s)
FRONT RF UNIT settings
• RF Unit Enable (yes, no)
• HVR (Reverse Gear) – audible (on, off), range (0-80m)
• HVF (Reverse Gear) – audible (on, off), range (0-80m)
• LV (Reverse Gear) – audible (on, off), range (0-80m)
• SO (Reverse Gear) – audible (on, off), range (0-80m)
• PT (Reverse Gear) – audible (on, off), range (0-80m)
• TS (Reverse Gear) – audible (on, off), range (0-80m)
• HVR (Park Gear) – audible (on, off), range (0-80m)
• HVF (Park Gear) – audible (on, off), range (0-80m)
• LV (Park Gear) – audible (on, off), range (0-80m)
• SO (Park Gear) – audible (on, off), range (0-80m)
• PT (Park Gear) – audible (on, off), range (0-80m)
• TS (Park Gear) – audible (on, off), range (0-80m)