User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 82 of 126
Issue: E
DIR = Gear Direction
0 = Reverse
1 = Forward
2 = Park / Neutral
12 OTHER FUNCTIONS
The following Functions are not accessible by the operator and need to be programmed by
the installer using a PC connected to the Display Unit RS-232 communications interface.
Refer to section 13 “Installer Mode Settings” for function settings and refer to the CAS-
CAM/RF
®
Installation Manual for detailed function descriptions and programming details.
Changes to installer Mode Settings only to be conducted by an AMT Service Agent.
12.1 Camera Titles (8 chars max)
12.2 Camera Brightness Settings
12.3 Camera Colour Settings
12.4 Camera Mirror / Normal Mode
12.5 Camera Enable
12.6 Switching Settings
12.6.1 Forward Gear Switching
12.6.2 Forward Channel Selection
12.6.3 Reverse Gear Switching
12.6.4 Reverse Channel Selection
12.6.5 Sleep Time
12.6.6 RF Switching
12.6.7 Wake on Forward Gear
12.6.8 Wake on Reverse Gear
12.6.9 Central RF
12.6.10 Keypad Tone
12.6.11 Auto Cycle
12.7 Front RF Unit Settings
12.8 Rear RF Unit Settings
12.9 Reversing Siren Disable on Heavy Vehicle