User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 125 of 126
Issue: E
computer.
Collision Avoidance
System (CAS)
The classification of sensing technologies used to prevent
collisions between objects.
Command
A user selectable task to be run by a computer.
Communications
The system used to transfer data between computers and
other computers or hardware.
Confirm
The operation of acknowledging the presence of a new
object detection on the Heavy Vehicle Display Unit.
Involves the User visually confirming the presence of a
new object using cameras and pressing the ‘CONFIRM’
key to cancel the alarm.
Day / Night Camera
Low light level camera technology where the camera
automatically switches from Colour to Black & White at a
preset low light level enabling images to be viewed in
near dark conditions.
Detection
The term used to describe the sensing of the presence of
an object.
Detection Range
Refers to the distance over which an object can be
detected by the CAS-CAM/RF
®
system.
Detection Zone
Refers to the area around which an object can be
detected by the CAS-CAM/RF
®
system.
Diagnostic
A command or procedure used to find out about the
behaviour of a system, usually if a problem has occurred.
Flash Memory
A storage medium that retains data when power is
removed. Used on all CAS-CAM/RF
®
equipment for
saving User or Installer programmed settings.
Hardware
Electrical equipment used to perform functions the nature
of which are determined by the combination of the