Operator's Manual Part 1

6-18 ApexPro Telemetry System Revision D
2001989-134
Telemetry Setup: Current Telemetry Listings
Admitted Telemetry Patients
NOTE
This overview covers the controls in a row. Each row contains
information for one telemetry patient.
The second line of an entry shows the current software level for the
patient bed in question.
Tower—indicates which telemetry receiver system this telemetry patient
is communicating with.
Receiver—indicates the receiver inside the telemetry receiver system
with which this telemetry transmitter is communicating.
Unit|Bed—indicates the unit and bed to which this patient has been
assigned.
Type—indicates the type of patient this is: Tele Bed or Tele Combo.
Transmitter—indicates the identification number assigned to this
patient’s transmitter.
Bed and Transmitters
Telemetry Beds—allows you to add, modify, or delete a telemetry bed
name.
Hardwire Beds—allows you to add, modify, or delete a hardwire bed
name.
Transmitters—allows you to add, modify, or delete a telemetry
transmitter.