Safety Manual

Regulatory Information
collect this type of data, it is your responsibility to ensure that you comply with all
applicable legal requirements.
Responsibility of the Manufacturer
This section describes the responsibility of GE Healthcare as the manufacturer of your
product.
GE Healthcare is responsible for the safety, reliability, and performance of hardware
supplied by GE Healthcare only if the following conditions are met:
Assembly operations, extensions, readjustments, modifications, or repairs are
performed by persons authorized by GE Healthcare.
The electrical installation of the room where the device is used complies with the
requirements of the appropriate local, state, and other government regulations.
The equipment is used in accordance with the instructions for use.
Responsibility of the Purchaser/Customer
The customer is responsible for providing appropriate desks, chairs, electrical wall
outlets, network connections, and analog phone lines, and for locating any of the
system components described in the manuals in compliance with all local, state, and
national codes.
Lack of data security may compromise patient privacy. GE Healthcare recommends
that you take appropriate steps to secure the privacy of communication on your
network when using this product.
Warranty Information
This device is considered GE Healthcare-supplied hardware. Only authorized GE
Healthcare service personnel should service the device. Any unauthorized attempt to
repair equipment under warranty voids that warranty. It is the user’s responsibility to
report the need for service to GE Healthcare or to one of their authorized agents.
2109599-003 A MAC
7 Resting ECG Analysis System 7