User's Manual

Revision B Model 340 Telemetry System 4-1
2003720-001
Chapter 4
Setup Procedures 4
This section contains step-by-step instructions for connecting and testing
your Model 340 Telemetry System.
,03257$17
CHANNEL NUMBERS—Ensure that the Model 340R
Receiver and Model 340T Transmitter are operating on
the same frequency; the channel numbers must be
identical. The channel number label is located on the
front of the Model 340R and on the side of the Model
340T.
If you have more than one telemetry system, make sure
that each transmitter/receiver pair operates on a unique
frequency.
Connecting the Receiver and Monitor. . . . . . . . . . . . . . . . . . 4-2
Setting Up the Model 340T Transmitter . . . . . . . . . . . . . . . 4-7
Performing a Functional Checkout . . . . . . . . . . . . . . . . . . . 4-10