Operating Instructions

CONNECTION
Connection to the SR600 receiver is via PL1, PL2 and PL3 which plug directly into the
user's own equipment. The location of these connectors is shown in Figure 1 and detailed
in the following tables.
PIN NAME FUNCTION REMARKS
1 0V 0 volts common ground
2 RF I/P RF input 50 ohms input
3 0V 0 volts common ground
Connector PL1 pin detail
PIN NAME FUNCTION REMARKS
1 +VIN positive supply +6.0V to +15.0V
2 0V 0 volts common ground
Connector PL2 pin detail