User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Apex Transmitter
- 3 ApexPro CH Transmitter
- Program the Transmitter’s Basic Functions
- View Transmitter Diagnostics
- Update Transmitter Firmware
- ApexPro CH Appendices
- 4 ApexPro Transmitter
52 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions Revision A - Draft 7
2001989-135
ApexPro CH Transmitter
Appendix 2: Access ApexPro CH Technical Functions (Super User)
Several high-level technical functions are available by following the steps in
“Access Super User Mode” below. Technical functions are password-
protected to prevent accidental use. These functions are generally used only
by qualified service personnel.
Requirements
You must have the items identified in “Hardware Requirements for the
Programming Device” on page 9.
You may have a software upgrade kit, PN 2007039-005, containing one
software upgrade CD.
Access Super User Mode
Start the software as in “Run the Apex & ApexPro Programming Box
Software” on page 13 and then access the Super User mode of the software
by following these steps:
1. Click on the Communication status button (reference C below). A
password prompt will display.
2. Enter the password, mms_aps.
3. Click OK.
365A
Draft