User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Apex Transmitter
- 3 ApexPro CH Transmitter
- Program the Transmitter’s Basic Functions
- View Transmitter Diagnostics
- Update Transmitter Firmware
- ApexPro CH Appendices
- 4 ApexPro Transmitter
Revision A - Draft 7 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions 47
2001989-135
ApexPro CH Transmitter
8. When the code download is complete, a EEPROM update status bar
displays the progress of the EEPROM update. In addition, all the LED
lights on the transmitter flash.
9. A window displays next asking if you want to continue downloading code
to the transmitter. (The RA and the LA LED lights flash.) Select OK to
return to the Select Download Type window, or Cancel to exit the update
process.
To download the Application code, proceed with step 5 in “Erase &
Download Application Code” on page 42
or
Select Cancel to exit the update process and return to the Program
ApexPro CH Transmitter window. (Selecting Cancel closes Super
User functions.
10. Confirm that all Power-up Self Test Status messages indicate Passed. See
“Appendix 1: ApexPro CH Troubleshooting” on page 49 if any failures
occur.
393A
391A
Draft