User Manual Part 7

8-2 ApexPro™ 2001989-301A- draft 1
Viewing stored patient data
Stored data
The CIC Pro center can retrieve in-unit parameter data from patient monitors
connected to the Unity Network and retrieve parameter data from secondary devices
connected through a Unity Network Interface. Stored events, parameter numeric data,
graphic trends, and full disclosure patient data is identified by the date and time the
data was collected. As a result, stored data is linked to a specific time focus.
You can review or print stored patient data from the following data review tools:
 Events directory
 Event Strip
 FD Strip (full disclosure) (purchased option)
 FD Page (full disclosure) (purchased option)
 Graphic Trends
 Vital Signs (parameter numeric data)
 Calipers
NOTE
When using a second display, the second display will always open the most
recently used data review tool.
NOTE
Solar 9500 information monitor parameters not supported by the CIC Pro center
will not be available for viewing or printing at the CIC Pro center. However, this
data will be available locally at the Solar 9500 monitor.
Time focus data
When parameter data is collected and stored, the stored patient data is linked to a
specific time focus. When viewing an area of interest for one type of patient data (e.g.
Vital Signs), you can view another type of patient data (e.g. Graphic Trends) that was
collected and stored at that same time focus.
As a result, when viewing a patient’s parameter numeric data (vital signs) that was
collected and stored at 7:28 pm on January 10, you can select Graphic Trends to view
the graphic trend data that was also collected and stored at 7:28 pm on January 10.
NOTE
When reviewing stored ECG data samples or strips, the degree of linking
between time focus and the data is determined by your Full Disclosure license.
You can only view full disclosure data that was stored within the time span
identified by your Full Disclosure license. If you attempt to view data that
exceeds your Full Disclosure license, the CIC Pro center displays the following
message: No data is available for requested time.
NOTE
When using a second display, you can display data from two different data
review tools using the same time focus in the top and bottom halves of the
display screen.
Draft