User Manual Part 6

5-10 ApexPro™ 2001989-301A- draft 1
Alarms
You may change any of the undimmed setting options. When an option appears
dimmed, you cannot change it.
Adjusting the parameter limit values
WARNING
ALARM CONTROL SETTINGS—If you adjust parameter limits or
alarm levels at the CIC Pro center, these setting changes are also
implemented by the bedside monitor. You must notify the bedside
caregiver that you changed the parameter limit or alarm levels of
that bedside monitor.
1. From the Alarm Control window, click on the alarm limit Low or High field.
2. Click the up or down arrows to increase or decrease the alarm limit value. You
may also type the values directly into the highlighted data field.
3. Repeat the previous steps to adjust additional alarm limit values.
4. After making your selections, complete one of the following tasks:
 Choose a different control setting to adjust.
 Click the (close button) on the top right side of the window to close the
window.
Adjusting the alarm levels
WARNING
ALARM CONTROL SETTINGS—If you adjust parameter limits or
alarm levels at the CIC Pro center, these setting changes are also
implemented by the bedside monitor. You must notify the bedside
caregiver that you changed the parameter limit or alarm levels of
that bedside monitor.
1. From the Alarm Control window, click on the alarm Level field.
2. Click the down arrow to display a list of alarm levels.
3. Select the desired alarm level.
4. Repeat step 1 to step 3 to adjust additional alarm level settings.
5. After making your selections, complete one of the following tasks:
 Choose a different control setting to adjust.
 Click the (close button) on the top right side of the window to close the
window.
Adjusting telemetry Alarms On/Off control settings
Draft