User's Manual Part 2

102 Mercury Reference Manual 05-4446A01, Rev. D
Invisible place holder
Figure 3-70. Redundancy Configuration Menu (AP Only)
• Redundancy Configuration—Enable/disable redundancy switcho-
ver for AP. [enabled, disabled; disabled]
• Network Event Triggers—This selection opens a submenu
(
Figure 3-71 on Page 103) where you can set/view the trigger
status for Network Events.
•
Radio Event Triggers—This selection opens a submenu
(
Figure 3-72 on Page 103) where you can set/view the trigger
status for Radio Events, such as a loss of associated Remotes or
excessive packet errors.
•
Hardware Event Triggers—This selection opens a submenu
(
Figure 3-73 on Page 104) where you can set/view the trigger
status for initialization/hardware errors.
•
Redundancy Configuration Options—This selection opens a sub-
menu (
Figure 3-74 on Page 104) where you can set the thresh-
old criteria for declaring an error event.
•
Force Switchover—Selecting this option forces a manual (user
initiated) switchover to the backup AP. The “challenge ques-
tion”
Are you sure? (y/n) is presented to avoid an unintended
switchover. To invoke the change, press the letter y followed by
the Enter key.