User's Manual Part 2

90 Mercury Reference Manual 05-4446A01, Rev. D
5. When the next screen appears (Figure 3-56), press A to select the
desired data baud rate and B to select the data byte format. Press N to
continue.
Figure 3-56. Select Data Baud Rate and Byte Format
6. The screen shown in
Figure 3-57 appears next. Press A to select the
Buffer Size of message packets, and B to select the Inter-Frame
Delay. Press N to continue with the wizard.
Invisible place holder
Figure 3-57. Buffer Size and Inter-Frame Delay Values
7. On the next screen (Figure 3-58 on Page 91), select A and use the
spacebar to enable the serial port for data communication. Press
N to
continue the wizard.