User's Manual

MDS 05-6302A01, Rev. B MDS Mercury 16E Technical Manual 39
The following parameters are read-only unless Radio Test Mode is first
selected and set to Test. In Test Mode, these items become selectable:
• Test Key—Sets/displays keying status of the transmitter.
• Test Transmit Power—Sets/displays the transmitter's power set-
ting.
• Test Frequency—Sets/displays the radio’s test frequency.
• Test RF Bandwidth—Sets/displays the transmitter's bandwidth for
testing.
• Test Modulation—Sets/displays the modulation to use for testing.
• Test Active Channel—Sets/displays the channel to use for testing.
Invisible place holder
Figure 28. Radio Test Mode Screen
4.4 Configure Security Features & Integration with
a RADIUS Server
Device Management Interface Configuration
Using the Configuration - Security page, each of the device management
interfaces (HTTP, SNMP, SSH, telnet) can be enabled or disabled. For
secure installations, it is recommended that 1) the Telnet interface be
disabled, 2) the SNMP agent run in SNMPv3 mode, 3) the web server
be configured for HTTPS with MD5 digest.