User's Manual

6 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. B
2.2 Configure IP Address and Identity
The IP Address of the unit is configured on the Configuration - IP &
Networking
page. The IP address and netmask should be set according to
the network configuration defined by the system administrator. Note
that if the IP address is changed, the web browser session will need to
be re-started with the new configuration.
Invisible place holder
Figure 4. Mercury Configuration-IP & Networking
In addition to the IP address, the unit can be configured with an optional
Device Name for ease of administration. The name can be set on the
Configuration - Identity & Time page.
Invisible place holder
Figure 5. Mercury Configuration —Identity & Time